How to install your flat-top engine on GEBE's
Mount Kit w/o Engine
|
**Click Here to Order the Mount Kit Only**
|
52mm Clutch Kit; fits but is not limited
to : 25cc Robin/Subaru 4-stroke, 25cc Honda
4-stroke, 24cc - 33cc Tanaka 2-stroke, 34cc
Komatsu Zenoah/RedMax 2-stroke.
76mm Clutch Kit; fits but
is not limited
to: 35cc Robin/Subaru 4-stroke,
31cc Honda
4-stroke, 40cc Komatsu
Zenoah/RedMax
2-stroke, 33cc & 40cc
Tanaka 2-stroke,
43cc Mitsubishi 2-stroke,
...
If you don't know the clutch
size of your
engine, take the engine
to a Small Engine
Repair Shop, to find out.
We don't Know All
small engines nor have
the manpower to research
all engines - this kit
IS for the "Do-It-Yourself"ers.
|
|
1) Install the Clutch Housing and tab for
Safety Cover - safety cover tab goes on upper
left bolt of clutch housing. Tighten bolts
Safety Covers are trimmed
for a nice, close
fit, for the engines we
sell - use heavy
duty scissors or tin snips
if you want/need
to trim the engine side
of the plastic Safety
Cover for a better fit
with your engine.
DO NOT trim cover until
you have completely
finished installation of
the engine kit to
your Bicycle!
|
|
2) Install the throttle cable, of the GEBE
spring loaded Trigger Throttle assembly,
thru throttle barrel (slot) on engine.
|
|
3) Bolt engine to the GEBE engine bracket
Tighten bolts
You have completed installation
of your engine
onto the GEBE Mount Kit
w/o Engine and are
now ready to install the Engine on your bicycle, (Printed instructions included
with kits.) and find out what that engine
is really meant to do.
|
|
|
